DISTRIBUTOR AND OFFICIAL PARTNER FOR 
& 
& 
With its length of 4 to 7 metres, the FAAC 640 range is ideal for traffic-control in large industrial accesses, with particularly demanding use.
- Activation system comprising hydraulic pump unit, plunger pistons, equaliser and transmission shaft
- Balancing by compression spring
- Internal stops adjustable for open or closed beam positions
- Load bearing housing in steel protected by cataphoresis treatment and polyester powder paint RAL 2004
- Hydraulic pump unit with hydraulic locking at opening and closing
- Built-in electronic control equipment
| # | SPECIFICATIONS |
|---|---|
| Power supply voltage | 230 Vac (+6% -10%) 50 (60) Hz |
| Electric motor | single-phase, bi-directional |
| Absorbed Power | 220 W |
| Absorbed Current | 1 A |
| Motor rotation speed | 1400 - 2800rpm |
| Pump flow rate | 0.75 - 1 - 1.5 - 2 l/min. |
| Thermal protection on motor winding | 120°C |
| Effective torque | 0÷470 / 0÷340 / 0÷250 / 0÷210 Nm |
| Electronic deceleration | Adjustable with cams |
| Operating ambient temperature | -20°C to +55°C |
| Weight | 84 kg |
| Type of oil | FAAC HP oil |
| Barrier body treatment | Cataphoresis |
| Paint | Polyester RAL 2004 |
| IP protection rating | IP 44 |
| Type of beam | Rectangular, rectangular with skirt |
| Dimensions (L x D x H) in mm | 230 x 390 x 1080 |
| Cooling | Forced air |