J355 HA-M30 Perimeter Security Bollard

Description

The Automatic bollard FAAC J355HA-M30 is designed and tested for the protection of sensitive areas such as airports, embassies, consulates, banks, ports, etc.

FAAC_J355_M30_P1

J355HA-M30-P1 bollard certified for use in perimeter security areas.

The bollard FAAC J355HA-M30-P1 has been tested according to American Standard “ASTM F 2656-07 - Standard Test Method for Vehicle Crash Testing of Perimeter Barriers”, obtaining certification for the highest class of penetration possible. Classification M30-P1 indicates in fact that the bollard FAAC J355 is able to stop a 6,800 kg lorry travelling at 50Km/h (=30M/h) with just 1 metre of total penetration (P1).

  • CERTIFIED according to Standard ASTM F 2656-07 M30
  • “Full optional” product; supplied equipped with the main accessories
  • Lock in raised position guaranteed even in the event of a power cut
  • Extreme care in the selection of materials
  • Also available in the EFO (Emergency Fast Operation) version for very fast rise

# SPECIFICATIONS
Drive Hydraulic Actuator
Cylinder stroke 1000 mm
Cylinder diameter 355 mm
Cylinder material standard version Steel S355JR EN10210 (16 mm thickness)
Rise time About 6 sec/standard version - About 1.5 sec/EFO version
Descent time About 2 sec
Hydraulic pump power supply 230 Vac +6% - 10%; 50/60 Hz
Power consumption 1200 W
Maximum expressed force 5000 N
Impact resistance 150 Kjoules
Break-in resistance 656 KJoules (in compliance with Standards ASTM F2656-07 - M30)
Load class C25 (25t)
Junction box protection rating IP 66
Recommended Use Use in security areas
Standard refracting strip Height 55 mm
Total weight 490 kg (bollard) + 250 kg (pit)
Operating temperature -15 °C / +55 °C
Operating temperature with heater (opt.) -40 °C / +55 °C
Pit to be walled in 570x690x1665 mm
Maximum length 50 m

TOP