J355 HA-M30 Perimeter Security Bollard


The Automatic bollard FAAC J355HA-M30 is designed and tested for the protection of sensitive areas such as airports, embassies, consulates, banks, ports, etc.

J355HA-M30-P1 bollard certified for use in perimeter security areas.

The bollard FAAC J355HA-M30-P1 has been tested according to American Standard “ASTM F 2656-07 - Standard Test Method for Vehicle Crash Testing of Perimeter Barriers”, obtaining certification for the highest class of penetration possible. Classification M30-P1 indicates in fact that the bollard FAAC J355 is able to stop a 6,800 kg lorry travelling at 50Km/h (=30M/h) with just 1 metre of total penetration (P1).

  • CERTIFIED according to Standard ASTM F 2656-07 M30
  • “Full optional” product; supplied equipped with the main accessories
  • Lock in raised position guaranteed even in the event of a power cut
  • Extreme care in the selection of materials
  • Also available in the EFO (Emergency Fast Operation) version for very fast rise

Drive Hydraulic Actuator
Cylinder stroke 1000 mm
Cylinder diameter 355 mm
Cylinder material standard version Steel S355JR EN10210 (16 mm thickness)
Rise time About 6 sec/standard version - About 1.5 sec/EFO version
Descent time About 2 sec
Hydraulic pump power supply 230 Vac +6% - 10%; 50/60 Hz
Power consumption 1200 W
Maximum expressed force 5000 N
Impact resistance 150 Kjoules
Break-in resistance 656 KJoules (in compliance with Standards ASTM F2656-07 - M30)
Load class C25 (25t)
Junction box protection rating IP 66
Recommended Use Use in security areas
Standard refracting strip Height 55 mm
Total weight 490 kg (bollard) + 250 kg (pit)
Operating temperature -15 °C / +55 °C
Operating temperature with heater (opt.) -40 °C / +55 °C
Pit to be walled in 570x690x1665 mm
Maximum length 50 m